emzone® A/C DRYER has been formulated to remove harmful moisture that can cause damage to A/C systems. This can occur as the result of a system leak.
DIRECTIONS: A/C System should be sufficiently charged and compressor engaged before installing product.
1. Shake can well.
2. Connect tap end of recharge hose to can.
3. Connect recharge hose to low side pressure service port.
4. Start engine and turn A/C to maximum cooling.
5. Ensure compressor is running and invert can.
6. Open valve of recharge hose and install contents into A/C system.
7. Remove recharge hose and check system for leaks.
See User Reference Guide for additional information and details.
DO NOT connect to high pressure side of system as can may burst.
FOR QUALIFIED PERSONNEL ONLY
