emzone® A/C COOL REFRIGERANT has been formulated to be a replacement for R134a and R12 substitutes in car, truck, tractor and boat A/C systems.
DIRECTIONS: Review regulations in your area. Recover any existing refrigerant into appropriate container. Do not mix refrigerants.
1. Connect tap end of charging hose to can.
2. Connect charging hose to low side pressure service port and invert can.
3. With compressor off, install minimum charge of liquid by tapping valve.
4. After minimum charge is achieved, start compressor and turn system to maximum.
5. Add additional 12a as required to correct pressure. Do not overcharge system.
6. Remove charging hose and check system for leaks.
7. Apply 12a Refrigerant label on A/C system in visible area near service port.
See User Reference Guide for additional information and details.
DO NOT connect to high pressure side of system as can may burst.
FOR QUALIFIED PERSONNEL ONLY
